Shown with FLI Dovetail; Also Available with Flat C-mount
Absolute Quantum Efficiency
See the Hyperion page for details and alternate configurations.
High quantum efficiency and exceptionally low read noise give the HPx285 sensitivity down to microlux from visible to the near infrared.
Link to HPx695 Specification Sheet in pdf format.
Technical Data
| Sensor Type | Interline Transfer CCD |
| Sensor | Sony ICX695 |
| Active Pixels | 2750 x 2200 |
| Pixel Size (microns) | 4.54 x 4.54 µm |
| Imaging Area (Diagonal) | 12.4 X 9.9 mm (15.8 mm) |
| Full Well Capacity | 17000 electrons |
| Typical Readout Noise | 3e- at 1.5 MHz |
| Typical Gain | 0.26 e-/ADU |
| Dynamic Range | 74.8 dB |
| Anti-Blooming | Yes |
| Cooling Method | Air (Optional Liquid) |
| Max. Cooling (Air) | 55°C below ambient |
| Temperature Stability | 0.1°C |
| Dark Current (typical) | 0.0007 eps at -30C |
| Interface | USB 2.0 |
| Digitization Clock | 1.5 MHz and 6 MHz |
| Data Bit Depth | 16 bit |
| Non-Linearity | <1% |
| Channels | 1 |
| Shutter | Electronic; Optional 25 mm |
| Optional Mount | Nikon F-mount |
| Subarray Readout | Standard |
| External Trigger In/Out | Standard |
| SDK / Software | USB2 / FLIGrab |
| Weight | 3.4 lbs (1.5 kg) |
| Environment | -30°C to 45°C | 10% - 90% Relative Humidity |
| Power | 12V (100-240V AC to 12V DC power supply included). With TEC off: <1A. TEC at 100%: 4.4A. (Optional Electromechanical Shutter open: 4A pulse for 100msec. Shutter held open, add 0.22A.) |