Shown with 45mm Shutter
See the MicroLine page for details and alternate configurations.
This version of the ML4710 uses a back-illuminated CCD on deep depletion silicon with an enhanced multilayer coating, giving high quantum efficiency across the visible and into the near infrared. Deep depletion silicon has substantially higher dark current than standard silicon.
Link to ML4710 AM Specification Sheet in pdf format.
Sensor Type | Back Illuminated Deep Depletion CCD NIMO) |
Sensor | Teledyne e2v CCD47-10-1-197 (AM2, NIMO) |
Active Pixels | 1024 x 1024 |
Pixel Size (microns) | 13 x 13 µm |
Imaging Area (Diagonal) | 13.3 X 13.3 mm (18.8 mm) |
Full Well Capacity | 100000 electrons |
Typical Readout Noise | 11 e- @ 700 kHz; 17 e- @ 2 MHz |
Typical Gain | 1.3 e-/ADU |
Dynamic Range | 78.9 dB |
Anti-Blooming | None |
Cooling Method | Air (Optional Liquid) |
Max. Cooling (Air) | 60°C below ambient |
Temperature Stability | 0.1°C |
Dark Current (typical) | 23 eps at -35C |
Interface | USB 2.0 |
Digitization Clock | 700 kHz and 2 MHz |
Data Bit Depth | 16 bit |
Non-Linearity | <1% |
Channels | 1 |
Shutter | 25mm; optional 45mm |
Optional Mount | Nikon F-mount |
Subarray Readout | Standard |
External Trigger In/Out | Standard |
SDK / Software | USB2 / FLIGrab |
Weight | 2.8 lbs (1.2 kg) |
Environment | -30°C to 45°C | 10% - 90% Relative Humidity |
Power | 12V (100-240V AC to 12V DC power supply included). With TEC off: <1A. TEC at 100%: 4.4A. (Optional Electromechanical Shutter open: 4A pulse for 100msec. Shutter held open, add 0.22A.) |