Shown with 45mm Shutter
Absolute Quantum Efficiency
See the MicroLine page for details and alternate configurations.
This version of the ML4710 uses a back-illuminated sensor on deep depletion silicon for enhanced near infrared sensitivity. Deep depletion silicon has substantially higher dark current than standard silicon.
Link to ML4710 DD Specification Sheet in pdf format.
Technical Data
| Sensor Type | Back Illuminated Deep Depletion CCD NIMO) |
| Sensor | Teledyne e2v CCD47-10-1-109 |
| Active Pixels | 1024 x 1024 |
| Pixel Size (microns) | 13 x 13 µm |
| Imaging Area (Diagonal) | 13.3 X 13.3 mm (18.8 mm) |
| Full Well Capacity | 100000 electrons |
| Typical Readout Noise | 11 e- @ 700 kHz; 17 e- @ 2 MHz |
| Typical Gain | 1.3 e-/ADU |
| Dynamic Range | 78.9 dB |
| Anti-Blooming | None |
| Cooling Method | Air (Optional Liquid) |
| Max. Cooling (Air) | 60°C below ambient |
| Temperature Stability | 0.1°C |
| Dark Current (typical) | 12 eps at -35C |
| Interface | USB 2.0 |
| Digitization Clock | 700 kHz and 2 MHz |
| Data Bit Depth | 16 bit |
| Non-Linearity | <1% |
| Channels | 1 |
| Shutter | 25mm; optional 45mm |
| Optional Mounts | Nikon F-mount |
| Subarray Readout | Standard |
| External Trigger In/Out | Standard |
| SDK / Software | USB2 / FLIGrab |
| Weight | 2.8 lbs (1.2 kg) |
| Environment | -30°C to 45°C | 10% - 90% Relative Humidity |
| Power | 12V (100-240V AC to 12V DC power supply included). With TEC off: <1A. TEC at 100%: 4.4A. (Optional Electromechanical Shutter open: 4A pulse for 100msec. Shutter held open, add 0.22A.) |